Online Catalogue
  •  
  • View Cart
  • Checkout
  • Items:, Value:
  •  

Product Sections


Main Pages


Best Sellers

5K/1850 - Cable Sleeve

5K/1850 - Cable Sleeve

£3.52

5K/1850 - Cable Sleeve

Replacement Ref : 5K/3013
AGS Equivalent: AGS1624/1
find out more

5CW/540 - Push Switch

5CW/540 - Push Switch

£18.56

5CW/540 - Push Switch, Ex mod Military electrical spares and aircraft Spare parts

find out more

FAV4 - Basic receptacle large

FAV4 - Basic receptacle large

£10.00

FAV4 - Basic receptacle large



Please note: Shipping/postage costs are applicable to all purchases but due to techincal difficulties that element is not currently calculated at checkout. Prior to checkout please request a shipping/postage quote from us via email at sales@aerovintage.co.uk or telephone on 01580 830215.. Apologies for any inconvience this may cause.




Please note: Shipping/postage costs are applicable to all purchases but due to techincal difficulties that element is not currently calculated at checkout. Prior to checkout please request a shipping/postage quote from us via email at sales@aerovintage.co.uk or telephone on 01580 830215.. Apologies for any inconvience this may cause.

find out more

5C/2114 - Switch Cover Flap

5C/2114 - Switch Cover Flap

£16.47

5C/2114 - Switch Cover Flap, Ex mod Military electrical spares and aircraft Spare parts

find out more

Rolls Royce Eagle

Rolls Royce Eagle

£75,000.00

There is only one other known to survive in private hands so this is an incredibly rare find. There are some external accessories missing such as the water and oil pump and the two carburettors. We have some CH Eagle carburettors from a different Eagle, which could be adapted. We can manufacture a water pump and oil pump if required, as an extra cost. We can also rebuild the engine to flight or ground running. £75,000 as is.
find out more

New Products

Sleeve Type 1

Sleeve Type 1

£10.96

Sleeve, Type 1, circular, brass, 22swg electro tinned.
find out more

Smith's Fuel Gauge Tank Units, gasket set

Smith's Fuel Gauge Tank Units, gasket set

£25.65

This set fits most of the Spitfire/Hurricane Smith's units and consists of; 6A/2282 gasket cover,
6A/2284 washer, screw, cover and 6A/1009 washers, sealing under screws

find out more

4332819 Gauge Temperature Mk. 2A

4332819 Gauge Temperature Mk. 2A

£126.00

24-volt fluorescent for use with bulb, transmitting 6A/1775 or 6A/1566
find out more

5C/890 Plug, Type F 3-Pole

5C/890 Plug, Type F 3-Pole

£68.90

Very scarce now, but used on the connecting lead between the gunsight and panel, it goes into socket 5C/892 Socket Type 2, 3-Pole which we also stock, and is screwed onto the instrument panel.
find out more

AGS 226A, 226B and component label (set of 3)

AGS 226A, 226B and component label (set of 3)

£30.00

These are exact copies to the original 1916 RFC drawing in heavy brass, bass relief - a process difficult if not impossible to obtain today. The set includes one Royal Aircraft Factory component label.
find out more

Aircraft Hardware

Online Catalogue |  Aircraft Hardware

AGS (Aircraft General Stores)

See our range of English AGS aircraft spares. View a selection that we have either manufactured ourselves or stock.

AGS 1651/11 (5K/6) - Sleeve Type 1

Sleeve, Type 1, circular, brass, 22swg electro tinned.

Nuts, Anchor Nuts, Bolts and Screws

Countersunk Head Bolts & Screws
Raised Head Bolts & Screws
Socket Head Screws

American AN spares & hardware

We have yet to list our holdings of AN hardware, but we have four huge crates, each weighing about a ton, with new bolts, nuts, and almost every fastener in the AN range. Coming soon, so keep looking

Fairey Type Fasteners

New design: All parts are identical looking to the originals, and are complete with embossed writing where appropriate. The cross-piece in the locking mechanism of the 40 and 30 mm type are round bar instead of the original T shaped section. This makes replacement of the cross-piece considerably easier (it is held in place with a spring dowel and not soldered); this minor alteration reduces the unit cost significantly, and means that replacement pins can be easily fitted. This modification is not visible from the outside and the parts are identical looking when fitted. Finish is in clear passivated (silver-coloured) cadmium just as the originals.

Tubular Rivets (AGS 843 or AGS 501H)

Tubular Rivets (AGS 843)

HIghest quality tubular rivets made to AGS 843 specifications with top quality materials. Made in our own workshops with aircraft quality materials.

Please note: Shipping/postage costs are applicable to all purchases but due to techincal difficulties that element is not currently calculated at checkout. Prior to checkout please request a shipping/postage quote from us via email at sales@aerovintage.co.uk or telephone on 01580 830215.. Apologies for any inconvience this may cause.

Online Catalogue |  Aircraft Hardware