Online Catalogue
  •  
  • View Cart
  • Checkout
  • Items:, Value:
  •  

Product Sections


Main Pages


Best Sellers

Sopwith Pup - Compass card holder and deviation card.* Price per set (card plus frame)

Sopwith Pup - Compass card holder and deviation card.* Price per set (card plus frame)

£27.50

Sopwith Pup - Compass card holder and deviation card.* Price per set (card plus frame)

Fitted to all British military aircraft from the 1st WW to the 2nd. The frame is painted black. The unused card is dated from the 30's, but is identical to that fitted to 1st WW a/c.

Price per set (card plus frame)
find out more

5CW/547 - Switch Tumbler

5CW/547 - Switch Tumbler

NMP002 - R.A.F. cockpit engine plate

NMP002 - R.A.F. cockpit engine plate

R.A.F. cockpit engine plate.

This plate is fitted to most British 2nd World War and 1930's aeroplanes including the spitfire. It is an original item, made of brass, and is a Rolls Royce part; the size is 4" x 3".

NMP002A - 'A' Condition at £45 each excluding VAT and delivery.

****PLEASE NOTE**** Condition 'B' Items Now Out Of Stock
find out more

Ki-Gass priming pump - Small Type

Ki-Gass priming pump - Small Type

£399.00

These have been specially commisioned by us, due to the unavailability of these in even usable condition originals. They are quite perfect in every detail and are an extremely high quality item.

Please Note: If this pump is to be used on a pressurised fuel system, you will need to fit a non-return valve in the pipeline to the ki-gass pump from the tank.
find out more

Bristol Propeller Transfer

Bristol Propeller Transfer

£11.00

Unused old stock, from the 1st WW they are of the varnish fix type. These are tricky to use and great care is needed. They are not made like this today, but the result is an almost completely flat transfer of the highest quality. Very limited number available, they are just under 3” in diameter. Full instructions are given on how to affix them.
find out more

New Products

MG08 15 'Spandau' Aircraft Machine Gun (deactivated) Serial No. 4441

MG08 15 'Spandau' Aircraft Machine Gun (deactivated) Serial No. 4441

£9,450.00

This exceedingly rare and famous gun is from a shot-down aircraft, and has some war damage to it, but has also some missing parts (mainly internal, but the visible feed block and spring cover for example are absent) and there is minor corrosion. The gun was found in storage in a private English boarding school suggesting an ex-RFC/RAF pupil surviving the Great War donated it as a war souvenir. Fitted to many German fighters in the 1st World War, this gun intriguingly shows a number of remnants of splashed on scarlet paint of a contemporary nature. To avoid raising your hopes, the guns for the famous Fokker Dreidecker of Manfred von Richtoffen are (speculatively) stated by P.J. Carisella to be 695 & 1795, but we can find neither confirmation nor the source of this information; an unknown number of German Great War aircraft were painted scarlet, so further research may uncover more of this guns intriguing past. Deactivated to EU specifications, it can be sent anywhere in the EU. We cannot send this out of Europe - especially to the USA - unless the buyer arranges an import licence and only then will we apply for an export licence from the UK (the cost of this can be advised).
find out more

Instrument Pointers or Instrument Needles

Instrument Pointers or Instrument Needles

£7.89

These brass needles are made of .012" (0,29mm) thick brass and come in the sizes and shapes as in the drawing above. Please note that they do not come with the central hub or boss, and as this can vary from instrument to instrument we cannot stock the range.
find out more

5K/221 - Cleat, Aluminium No. 12

5K/221 - Cleat, Aluminium No. 12

£2.64

Clamps up to 1/8" rigid tube (capillary for example), though the AP 1086 Section 5K (electrical AGS) declares it is for "6mm Cable". This seems a bit of a squeeze unless it is rubber covered cable.
find out more

6A/70 - Flexible drive, Rev Counter Cable, 10ft

6A/70 - Flexible drive, Rev Counter Cable, 10ft

6A/70 - Flexible drive, Rev Counter Cable, 10ft

Standard Air Ministry rev counter cable.

Electro Plated £220.00
Brass £242.00

This item is made to order and is therefore non returnable.
find out more

6A/68 - Flexible drive, Rev Counter Cable, 9ft

6A/68 - Flexible drive, Rev Counter Cable, 9ft

6A/68 - Flexible drive, Rev Counter Cable, 9ft

Standard Air Ministry rev counter cable.

Electro Plated £220.00
Brass £242.00

This item is made to order and is therefore non returnable.
find out more

6A/66 - Flexible drive, Rev Counter Cable, 8ft (Tiger Moth)

6A/66 - Flexible drive, Rev Counter Cable, 8ft (Tiger Moth)

6A/66 - Flexible drive, Rev Counter Cable, 8ft (Tiger Moth)

Standard Air Ministry rev counter cable.

Electro Plated £220.00
Brass £242.00

This item is made to order and is therefore non returnable.
find out more

AGS (Aircraft General Stores)

Online Catalogue | Aircraft Hardware |  AGS (Aircraft General Stores)

AGS 156-C Wire Ferrules

These are new manufacture wire ferrules used on most British 1st World War aircraft. Made of piano wire, and tin plated they are incredibly hard to find and even harder to manufacture. At last we have a source and we will soon have most other sizes available. Suits 14 swg (.080" or 2mm) wire.

AGS 226 A & B Brass nameplates for Petrol and Oil tanks

These are exact copies to the original 1916 RFC drawing in heavy brass, bas relief - a process difficult if not impossible to obtain today. In addition, the set includes one Royal Aircraft Factory component label. The set of 3 is £30.00. Individually available also at £16.75 each for the Petrol and Oil label and £6.45 for the component label.

AGS 275 - Fuel Filter

AGS 275 Petrol Filter. This was used on most 1st WW British aircraft, and is for fuel systems that have 5/16" OD fuel pipes. This exact reproduction has been made for us to original drawings and specifications, has the main casting made of gunmetal which is soldered on the exterior, just as the original item. The filter is held in place with a phosphor bronze spring and the dome is removable for cleaning. As with all our reproductions, the quality is extremely high and no compromises were allowed in the specification and representation of this part.

AGS 676 - No 1 Drain Cock, plated brass

This is for a flexible outlet pipe size of about 3/8" bore (for petrol tanks perhaps). The thread is ¼" BSP, and there is a safety pin to hold it shut. This became obsolete in the early ‘30’s so to find unused is a great rarity. Very few left now.

AGS 677 - No 2 Drain Cock, plated brass

This is for a flexible outlet pipe size of about 5/8" bore (for small oil tanks, perhaps). The thread is 1/2" BSP, and there is a safety pin to hold it shut. This became obsolete in the early ‘30’s so to find unused is a great rarity. Very few left now.

AGS 690 A - 10cwt, to suit Shackle Pin SP4Y-A2 which is 5/32

AGS 690 A - 10cwt, to suit Shackle Pin SP4Y-A2 which is 5/32", (0.156" diameter)

AGS 690 D - Alternate part number SP1-690D, 45 cwt, to suit Shackle Pin SP4Y-E7 which is 9/32

AGS 690 D - Alternate part number SP1-690D, 45 cwt, to suit Shackle Pin SP4Y-E7 which is 9/32" (0.281" diameter)

AGS 895-1 - Crowbar or cable holding clips

These are original AGS items and not modern incorrectly shaped billiard cue holders.

AGS 895-2 - Cable holding clips

A slightly smaller clip than the familiar Spitfire crow-bar clip (see AGS 895/1) and is used for holding some elements of electrical wiring in place. Cadmium plate finish, slight storage dullness to plating.

AGS 940/B Oil Thermometer Pocket

Although long obsolete, this very rare survivor from the late '20's is brand new old stock, and used for in line oil temperature gauge sensors, of the capillary type. We have two only available at £150 each.

AGS 1522 - (5K/1844) Sleeve insulating

AGS 1522 Sleeve insulating, Ex mod Military electrical spares and aircraft Spare parts

Alt Part Number. 5K/1844

AGS 1536-A - (5K/2324) Clips bonding type e

5K/2324 - (AGS 1536-A) Clips bonding type e

AGS 1541-A - (5K/180) cleats electric cable brass

5K/180 - (AGS 1541-A) cleats electric cable brass, Ex mod Military electrical spares and aircraft Spare parts

AGS 1541-D - (5K-152) Cleat, Electric Cable

AGS 1541-D - (5K-152) Cleat, Electric Cable

For cable 7/16" dia (No. 4). Cad plated Brass.

AGS 1591-B - (5K/1838) Cable end hook

5K/1838 - Cable end hook , Ex mod Military electrical spares and aircraft Spare parts

Alternative Part No. AGS 1591-B

AGS 1612 - (5K/143) Bonding leads 5

AGS 1612 - (5K/143) Bonding leads 5" long

AGS 1616 - (5K/1637) Sleeves bonding ht short

AGS 1616 - (5K/1637) Sleeves bonding ht short

AGS 1617-3 - (5K/164) Saddles Cable

5K/164 - (AGS 1617-3) Saddles Cable, Ex mod Military electrical spares and aircraft Spare parts

Alternative Part No. 5K/164

AGS 1620-3 - (5K/1811) Cable end hook

AGS 1620-3 - (5K/1811) Cable end hook

AGS 1624/1 - Cable Sleeve

AGS 1624/1 - Cable Sleeve

Replacement Ref : 5K/3013

AGS Equivalent: AGS1624/1

AGS 1654-4 - (5K/53) sleeve outer mk 4

AGS 1654-4 - (5K/53) sleeve outer mk 4

AGS 1658-4 - (5K/94) Nut cable gland

AGS 1658-4 - (5K/94) Nut cable gland

AGS 1658-6A - (5K/99) Nut cable gland

AGS 1658-6A - (5K/99) Nut cable gland

AGS 1661-A - (5K/112) Clip bonding w/p brass

AGS 1661-A - (5K/112) Clip bonding w/p brass

AGS 1661-B - (5K/113) Clip bonding w/p brass

AGS 1661-B - (5K/113) Clip bonding w/p brass

AGS 1661-C - (5K/114) Clip bonding w/p brass

5K/114 - (AGS 1661-C) Clip bonding w/p brass, Ex mod Military electrical spares and aircraft Spare parts

Alternative Part No. 5K/114

AGS 1738-1 Terminal Lug No. 12 (Right Hand)

AGS 1738/1 Terminal Lug No. 12 (Right Hand). Made of lead covered brass, this will take a 5/16" diameter bolt and 5/16" diameter cable - or indeed any combination thereof.

AGS 2007-B-1 4BA Steel with red fibre insert

AGS 2007-B-1 4BA Steel with red fibre insert. Fixed type, usually the fibre insert types, as fitted to WW2 aircraft, are considered by some to be single-use, but we have used them several times until the locking becomes unacceptable.

AGS 2007-B-3 4BA All-alloy anchor nut

AGS 2007/B/3 4BA All-alloy anchor nut. Fixed type, all metal, in pristine condition. Ex surplus stocks

AGS 2007-J-3 3/8

AGS 2007-J-3 3/8" BSF Anchor Nut. Thick, fixed nut, aluminiu,m, with steel plate. These are stained and may have some very small rust spots

AGS 2012-C 2BA Floating Double-Lug Anchor Nut

AGS 2012-C 2BA Floating Double-Lug Anchor Nut. All steel cadmium plated. Nyloc version £2.50 each.
All metal Oddie version £2.50 each.
All new surplus stock in pristine condition. Modern ones are gold passivated, these are clear (silver-like) finish just as they had in WW2

AGS 2012-N 1/2

AGS 2012-N 1/2" BSF Anchor Nut. Thick, fixed nut, cadmium plated in excellent condition. Ex surplus

AGS 2013-C 2BA Floating Anchor Nut

AGS 2013-C 2BA Floating Anchor Nut. Thin, with alloy plate and cadmium plate steel Nyloc nut. In pristine condition, ex surplus

AGS 2013-E-1 Quarter inch BSF Steel Floating Type, with an inderminate locking material

AGS 2013-E-1 Quarter inch BSF Steel Floating Type, with an inderminate locking material. Could be a grey fibre or Nyloc - we cannot tell. Slight discolouration of the cadmium plating, but no signs of rust.

Amal carburettor ball joint

These are genuine Amal made (and Amal stamped) new/old stock in 2BA which is hard to get as an ex-Air Ministry item, and not a modern repro. They are all unused and useable, but are store soiled and dirty with preservative. There may also be the odd corrosion spots, but this does not detract from the usability of the item and we will always endeavour to supply as good as we can find from our stock.

Also available are a few with an un-plated brass body.

SP40-A28 - (5K/2943) Grommet

SP40-A28 - (5K/2943) Grommet

SP40-A56 - (5K/2979) Grommet, Rubber

SP40-A56 - (5K/2979) Grommet, Rubber


Panel dia: 2.00"
Panel thickness: .040"
Grommet inside dia: 1.75"
Grommet thickness: 0.416"
Grommet outside dia: 2.375"

SP40-B56 - (5K-2980) Grommet, Rubber

SP40-B56 - (5K-2980) Grommet, Rubber

Panel hole size: 2"
Panel thickness: 0.070"
DO: 2.375"
ID: 1.75"
Thickness: 0.446"

SP40-F64 - (5K-2989) Grommet, Rubber

SP40-F64 - (5K-2989) Grommet, Rubber

Panel hole dia: 2.187"
Panel thickness: 0.027"
Hole dia: 2"
Width: 5/8"

SP8Y-414L  35 cwt Turnbuckles

(Tension rod type) cadmium plated steel

This is the price for the whole assembly, but LESS rollers (SP8-Y-16).

Turnbuckle 4BA 5 cwt eye-eye assembly

Consisting of brass barrel AGS 490-B, and cad plated steel eye ends AGS490-C & AGS490-E.

Other well-known retailers charge well over £100 for this assembly, so a real bargain for this rare part. All are in good condition, ex-Air Ministry stock.

10% discount for quantities over 10 off please contact us.

AGS 843/16 - Tubular Rivets 3/16

AGS 843/16 - Tubular Rivets 3/16" Diameter 1.00" Formed Length


Price: £2.11 (Excluding VAT at 20%)

AGS 843/16 - Tubular Rivets 3/16" Diameter 1.00" Formed Length

***Currently out of stock however longer sizes can be purchased and cut to your required length.***

Made to English AGS aircraft spares specifications

Diameter: 3/16"
Formed Length: 1.00"

PLEASE NOTE
: There is a minimum order requirement of 5 Rivets

AGS 843/18 - Tubular Rivets 3/16

AGS 843/18 - Tubular Rivets 3/16" Diameter 1.5" Formed Length


Price: £2.29 (Excluding VAT at 20%)

Quantity:

AGS 843/18 - Tubular Rivets 3/16" Diameter 1.5" Formed Length

Made to English AGS aircraft spares specifications

Diameter: 3/16"
SWG: 20
Unformed Length: 1.62"
Formed Length: 1.5"

PLEASE NOTE
: There is a minimum order requirement of 5 Rivets

AGS 843/19 - Tubular Rivets 3/16

AGS 843/19 - Tubular Rivets 3/16" Diameter 2.00" Formed Length


Price: £2.38 (Excluding VAT at 20%)

Quantity:

AGS 843/19 - Tubular Rivets 3/16" Diameter 2.00" Formed Length

Made to English AGS aircraft spares specifications

Diameter: 3/16"
Formed Length: 2.00"

PLEASE NOTE
: There is a minimum order requirement of 5 Rivets

AGS 843/31 - Tubular Rivets 1/4

AGS 843/31 - Tubular Rivets 1/4" Diameter 1.5" Formed Length


Price: £2.42 (Excluding VAT at 20%)

Quantity:

AGS 843/31 Tubular Rivets 1/4" Diameter 1.5" Formed Length

Made to English AGS aircraft spares specifications

Diameter: 1/4"
SWG: 17
Unformed length: 1.62"
Formed Length: 1.5"

PLEASE NOTE
: There is a minimum order requirement of 5 Rivets

AGS 843/32 - Tubular Rivets 1/4

AGS 843/32 - Tubular Rivets 1/4" Diameter 2.0" Formed Length


Price: £2.58 (Excluding VAT at 20%)

Quantity:

AGS 843/32 - Tubular Rivets 1/4" Diameter 2.0" Formed Length

Made to English AGS aircraft spares specifications

Diameter: 1/4"
SWG: 17
Unformed length: 2.15"
Formed Length: 2.0"

PLEASE NOTE
: There is a minimum order requirement of 5 Rivets

AGS 843/33 - Tubular Rivets 1/4

AGS 843/33 - Tubular Rivets 1/4" Diameter 2.5" Formed Length


Price: £2.84 (Excluding VAT at 20%)

Quantity:

AGS 843/33 - Tubular Rivets 1/4" Diameter 2.5" Formed Length

Made to English AGS aircraft spares specifications

Diameter: 1/4"
SWG: 17
Unformed Length: 2.67"
Formed Length: 2.5"

PLEASE NOTE
: There is a minimum order requirement of 5 Rivets

AGS 843/45 - Tubular Rivets 5/16

AGS 843/45 - Tubular Rivets 5/16" Diameter 2.0" Formed Length


Price: £3.06 (Excluding VAT at 20%)

Quantity:

AGS 843/45 - Tubular Rivets 5/16" Diameter 2.0" Formed Length

Please Contact us to check on availability of this item>>

Made to English AGS aircraft spares specifications


Diameter: 5/16"
SWG: 17
Unformed Length: 2.15"
Formed Length: 2.0"

PLEASE NOTE
: There is a minimum order requirement of 5 Rivets
Please Contact us to check on availability of this item

AGS 843/46 - Tubular Rivets 5/16

AGS 843/46 - Tubular Rivets 5/16" Diameter 2.5" Formed Length


Price: £3.64 (Excluding VAT at 20%)

Quantity:

AGS 843/46 - Tubular Rivets 5/16" Diameter 2.5" Formed Length

Please Contact us to check on availability of this item>>

Made to English AGS aircraft spares specifications

Diameter: 5/16"
SWG: 17
Unformed Length: 2.67"
Formed Length: 2.5"

PLEASE NOTE
: There is a minimum order requirement of 5 Rivets
Please Contact us to check on availability of this item

AGS 843/99 - Tubular Rivets 3/8

AGS 843/99 - Tubular Rivets 3/8" Diameter 3.0" Formed Length


Price: £4.71 (Excluding VAT at 20%)

Quantity:

AGS 843/99 - Tubular Rivets 3/8" Diameter 3.0" Formed Length

Made to English AGS aircraft spares specifications

Diameter: 3/8"
SWG: 17
Unformed Length: 3.17"
Formed Length: 3.0"

PLEASE NOTE
: There is a minimum order requirement of 5 Rivets

Online Catalogue | Aircraft Hardware |  AGS (Aircraft General Stores)