Online Catalogue
  •  
  • View Cart
  • Checkout
  • Items:, Value:
  •  

Product Sections


Main Pages


Best Sellers

Sopwith Pup - Compass card holder and deviation card.* Price per set (card plus frame)

Sopwith Pup - Compass card holder and deviation card.* Price per set (card plus frame)

£27.50

Sopwith Pup - Compass card holder and deviation card.* Price per set (card plus frame)

Fitted to all British military aircraft from the 1st WW to the 2nd. The frame is painted black. The unused card is dated from the 30's, but is identical to that fitted to 1st WW a/c.

Price per set (card plus frame)
find out more

5CW/547 - Switch Tumbler

5CW/547 - Switch Tumbler

NMP002 - R.A.F. cockpit engine plate

NMP002 - R.A.F. cockpit engine plate

R.A.F. cockpit engine plate.

This plate is fitted to most British 2nd World War and 1930's aeroplanes including the spitfire. It is an original item, made of brass, and is a Rolls Royce part; the size is 4" x 3".

NMP002A - 'A' Condition at £45 each excluding VAT and delivery.

****PLEASE NOTE**** Condition 'B' Items Now Out Of Stock
find out more

Ki-Gass priming pump - Small Type

Ki-Gass priming pump - Small Type

£399.00

These have been specially commisioned by us, due to the unavailability of these in even usable condition originals. They are quite perfect in every detail and are an extremely high quality item.

Please Note: If this pump is to be used on a pressurised fuel system, you will need to fit a non-return valve in the pipeline to the ki-gass pump from the tank.
find out more

Bristol Propeller Transfer

Bristol Propeller Transfer

£11.00

Unused old stock, from the 1st WW they are of the varnish fix type. These are tricky to use and great care is needed. They are not made like this today, but the result is an almost completely flat transfer of the highest quality. Very limited number available, they are just under 3” in diameter. Full instructions are given on how to affix them.
find out more

New Products

Instrument Pointers or Instrument Needles

Instrument Pointers or Instrument Needles

£7.89

These brass needles are made of .012" (0,29mm) thick brass and come in the sizes and shapes as in the drawing above. Please note that they do not come with the central hub or boss, and as this can vary from instrument to instrument we cannot stock the range.
find out more

5K/221 - Cleat, Aluminium No. 12

5K/221 - Cleat, Aluminium No. 12

£2.64

Clamps up to 1/8" rigid tube (capillary for example), though the AP 1086 Section 5K (electrical AGS) declares it is for "6mm Cable". This seems a bit of a squeeze unless it is rubber covered cable.
find out more

6A/70 - Flexible drive, Rev Counter Cable, 10ft

6A/70 - Flexible drive, Rev Counter Cable, 10ft

6A/70 - Flexible drive, Rev Counter Cable, 10ft

Standard Air Ministry rev counter cable.

Electro Plated £220.00
Brass £242.00

This item is made to order and is therefore non returnable.
find out more

6A/68 - Flexible drive, Rev Counter Cable, 9ft

6A/68 - Flexible drive, Rev Counter Cable, 9ft

6A/68 - Flexible drive, Rev Counter Cable, 9ft

Standard Air Ministry rev counter cable.

Electro Plated £220.00
Brass £242.00

This item is made to order and is therefore non returnable.
find out more

6A/66 - Flexible drive, Rev Counter Cable, 8ft (Tiger Moth)

6A/66 - Flexible drive, Rev Counter Cable, 8ft (Tiger Moth)

6A/66 - Flexible drive, Rev Counter Cable, 8ft (Tiger Moth)

Standard Air Ministry rev counter cable.

Electro Plated £220.00
Brass £242.00

This item is made to order and is therefore non returnable.
find out more

6A/64 - Flexible drive, Rev Counter Cable, 7ft

6A/64 - Flexible drive, Rev Counter Cable, 7ft

6A/64 - Flexible drive, Rev Counter Cable, 7ft

Standard Air Ministry rev counter cable.

Electro Plated £220.00
Brass £242.00

This item is made to order and is therefore non returnable.
find out more

Messerschmitt 109 Spares

Online Catalogue | German WW1 and WW2 Aircraft Parts |  Messerschmitt 109 Spares

9-601.260-700 - Daimler Benz DB601 Reduction Gear Cover

original part number 9-601.260-700. Casting only £2,500.
Photo of machined example for illustration purposes only and to demonstrate that we know they can be machined to function exactly as the original.

Please note: the part number is for identification only and has been taken from a parts book dated 1st September 1940 for the Daimler Benz 601 A/B Motor. All the above castings have been checked and an example fully machined to check for errors. No drawings are available for these parts although we have commissioned drawings taken from original parts for our own machining purposes, but for copyright and legal reasons we regret that we are unable to pass them on to our customers. As far as is known there are no factory drawings available.

Made To Order.

9-601.561-700 - Daimler Benz DB601 Mounting for boost control unit

Original part number 9-601.561-700.
Unmachined casting in heat treated L99 aluminium alloy £340.
Unmachined casting in magnesium £680.
If you require the part machined, please enquire.

Please note: the part number is for identification only and has been taken from a parts book dated 1st September 1940 for the Daimler Benz 601 A/B Motor. All the above castings have been checked and an example fully machined to check for errors. No drawings are available for these parts although we have commissioned drawings taken from original parts for our own machining purposes, but for copyright and legal reasons we regret that we are unable to pass them on to our customers. As far as is known there are no factory drawings available.

Made to order.

9-601.561-900 - Daimler Benz DB601 Automatic Boost Control Body

Original part number 9-601.561-900.
Unmachined casting in heat treated L99 aluminium alloy £650.
Unmachined casting in magnesium £1300.
If you require the part machined, please enquire.

Please note: the part number is for identification only and has been taken from a parts book dated 1st September 1940 for the Daimler Benz 601 A/B Motor. All the above castings have been checked and an example fully machined to check for errors. No drawings are available for these parts although we have commissioned drawings taken from original parts for our own machining purposes, but for copyright and legal reasons we regret that we are unable to pass them on to our customers. As far as is known there are no factory drawings available.

Made to order.

9-601.861-708 - Daimler Benz DB601 Cover for automatic boost control body

Original part number 9-601.861-708.
Unmachined casting in heat treated L99 aluminium alloy £150.
Unmachined casting in magnesium £300.
If you require the part machined, please enquire.

Please note: the part number is for identification only and has been taken from a parts book dated 1st September 1940 for the Daimler Benz 601 A/B Motor. All the above castings have been checked and an example fully machined to check for errors. No drawings are available for these parts although we have commissioned drawings taken from original parts for our own machining purposes, but for copyright and legal reasons we regret that we are unable to pass them on to our customers. As far as is known there are no factory drawings available.

Made to order.

Luftwaffe - Tail wheel - SOLD

SOLD - Tail wheel, in excellent potentially useable condition for Me 109 F/G and Buchon. 350 x 135 tyre and on small plate is 22C31-1

SOLD OUT

Me 109e Cannon Switch SOLD

This part is seen on Swiss 109e aircraft (as well maybe as some German ones), fitted in the round counter hole. It is exceptionally rare and no others are known to exist. Even the bf 109e in the Swiss Air force Museum is missing this part!

SOLD

Me 109e Propeller Pitch Control - SOLD

This was fitted to the early Bf 109e from the Battle of Britain period, and appears unused. It is in as near perfect condition as one could hope for. The part no’s on it are: SSH 48/8Z and on the rear Gerät Nr. 9-9502B.

SOLD OUT

Messerschmitt 109e - Ceramic aerial lead-in - ON HOLD

Ceramic aerial lead-in as fitted on the top of the fuselage. Usually found well broken, this is in one piece and is potentially useable

Spinner Kit Bf 109F

This Spinner Kit Bf 109F was orginally made for a 109F and is fitted to the aircraft pictured. It may also be the same as the 'Gustav', but not the 'Emil'. These are bare spinnings and will require finishing.
The high quality tooling made for this has meant that we can offer examples of the complete kit of parts to enable other projects to benefit without having to make the tooling required. Price £3,950 per set plus VAT. A crate can be constructed at an additional cost for any international shipping.
3 sets in stock

Wing tip lamp lens for 2nd WW German aircraft - new made

Wing tip lamp lens for 2nd WW German aircraft - new made

Buy either the Port or Starboard or pair at a reduced cost

Online Catalogue | German WW1 and WW2 Aircraft Parts |  Messerschmitt 109 Spares