Online Catalogue
  •  
  • View Cart
  • Checkout
  • Items:, Value:
  •  

Product Sections


Main Pages


Best Sellers

5C/898 - Buttons Push

5C/898 - Buttons Push

£16.88

5C/898 - Buttons Push, Ex mod Military electrical spares and aircraft Spare parts

find out more

NMP002 - R.A.F. cockpit engine plate

NMP002 - R.A.F. cockpit engine plate

R.A.F. cockpit engine plate.

This plate is fitted to most British 2nd World War and 1930's aeroplanes including the spitfire. It is an original item, made of brass, and is a Rolls Royce part; the size is 4" x 3".

NMP002A - 'A' Condition at £45 each excluding VAT and delivery.

****PLEASE NOTE**** Condition 'B' Items Now Out Of Stock
find out more

5C/1069 - Lamp Warning Red

5C/1069 - Lamp Warning Red

£18.60

5C/1069 - Lamp Warning Red, Ex mod Military electrical spares and aircraft Spare parts

find out more

5CX/493 - Glass Red

5CX/493 - Glass Red

£22.28

5CX/493 - Glass Red

Ex MOD Ministry of defence Red Glass navigation Lamp Replacement Glass

To Fit 5CX/492
find out more

New Products

Dunlop Mk. II Brake Valves

Dunlop Mk. II Brake Valves

Dunlop Mk. II Brake Valves

We are equipped to overhaul and set up these extremely complex items with new rubber seals, valves and sleeves plus most other hardware items available to incorporate in these rebuilds.

Please note. We do not sell spares for these units. Overhaul price is £1,500 per unit plus spares as required. This price is subject to the exchange unit being complete and undamaged internally, or excessively worn internal levers and pivots. Exchange units available for emergency breakdowns.
find out more

Hymatic Pressure Regulator 450 lbs

Hymatic Pressure Regulator 450 lbs

£400.00

Hymatic Pressure Regulator 450 lbs.

In good used condition.

Price as is £400 each and for N.O.S. (as available) £500 each.

Please note we can pressure test them at extra cost, if required.
find out more

5X - Special "C" Spanner

5X - Special

£12.96

5X - Special "C" Spanner

OUT OF STOCK
find out more

126 JQ Part No. 1116245 Fork clevis, swaged type, for cable size .09375"

126 JQ Part No. 1116245 Fork clevis, swaged type, for cable size .09375

£5.00

126 JQ Part No. 1116245 Fork clevis, swaged type, for cable size .09375"

In stainless steel, this is swaged to a flexible wire rope and is similar to MS20667-3 with a clevis width of 1/8", and a clevis pin hole diameter of .190".
find out more

Sopwith Pup and Camel

Online Catalogue | Aircraft Spares |  Sopwith Pup and Camel

Please Note:

Unless stated otherwise, all the items listed are exact visual and working reproductions of the original item, and are produced so that they are indistinguishable. We either hold original samples, or drawings to ensure that the highest standards of authenticity are maintained. While we try to maintain a limited stock of the items below, sometimes there could be a significant wait for the part to be re-manufactured.

Items marked with * are interchangeable with the Sopwith Camel (and some other Sopwith types), or can be with very little modification.

SL numbers are Sopwith Standard Parts ("Standard Lines")

AGS 156/C Wire Ferrules

These are new manufacture wire ferrules used on most British 1st World War aircraft. Made of piano wire, and tin plated they are incredibly hard to find and even harder to manufacture. At last we have a source and we will soon have most other sizes available. Suits 14 swg (.080" or 2mm) wire.

AGS 226 A & B Brass nameplates for Petrol and Oil tanks

These are exact copies to the original 1916 RFC drawing in heavy brass, bas relief - a process difficult if not impossible to obtain today.In addition, the set includes one Royal Aircraft Factory component label. The set of 3 is £30.00. Individually available also at £16.75 each for the Petrol and Oil label and £6.45 for the component label.

Sopwith Camel Replica panel

This is a Sopwith Camel replica panel that is built largely from new made parts that we manufacture.

To make such a panel from nothing is possible, though the compass is a challenge to make that we have yet to tackle.

See the various Sopwith Pup and Camel items that we can offer below and if you dont see what you need, let us know. We will see if we can help.

A.1526 - Padded windscreen that is attached to the Vickers machine gun, Pup & 1 ½ Strutter


This Sopwith Pup padded windscreen (also fitted to the Sopwith 1 ½ Strutter), fixes onto the handles on the rear of the Vickers machine gun.

PLEASE NOTE: The Vickers handles are shown for illustration only and are not available and are not included with the item.

Padded windscreen that is attached to the Vickers machine gun (A.1626) Pup & 1 ½ Strutter

From fully completed or Bare Unmachined castings

Control grip (round type) Snipe, Later Bristol Fighter and many 30's aircraft


Control grip (round type) Snipe, later Bristol Fighter and many 30's aircraft.

Bare Casting (aluminium), with drawing, Trigger Levers, Fully machined with drawings.


*** Please Click to see all options available, from bare castings to fully completed grips ***

Filler Cap and neck, AGS 234 A and flange AGS 234 B

Supplied as unmachined gunmetal castings with a set of original drawings to manufacture them. We can quote for machining them if required. Price £27.50 for the cap and £31 for the neck

SL 167 - Control grip*, complete with tubular column (Pup & Camel)


Control grip (SL 167)*, complete with tubular column (Pup & Camel).

The Pup does not have the trigger set but the Camel does.

Fully completed or bare unmachined casting.

Click to see more

Sopwith Dibowsky Scarff name plate

We have found an extremely rare original example of this plate, fitted to some Sopwith aircraft and had them reproduced exactly as the original.

Turnbuckle. AN 130-16L

We have found a small quantity of surplus unused, in as new condition, turnbuckles. The eye end is for 3/32" cable and the fork is .190" hole dia x fork .188" wide. The maximum length eye to eye is 8".

The barrel is brass and the ends cadmium plated steel. These equate in size and strength to the 1st WW French 5 mm pretty well for all Sopwith builders, unlike the British 2BA AGS turnbuckles which are under strength.

Mk. I Watch Holder and felt backing to take Mk. IV or V watch (fitted to most 1st WW British a/c)*

Mk. I Watch Holder and felt backing to take Mk. IV or V watch (fitted to most 1st WW British a/c)*


Price: £75.00 (Excluding VAT at 20%)

Quantity:

Mk.I watch holder, complete with felt backing for Mk. IV and V aviation pocket watches. Used on virtually all 1st WW British aircraft.*

Please Note: Watch not included.

Sopwith Camel - Scanned set of all original Sopwith Camel surviving drawings (same size as original drawings)

Sopwith Camel - Scanned set of all original Sopwith Camel surviving drawings (same size as original drawings)


Price: £1,750.00 (Excluding VAT at 20%)

Quantity:

Sopwith Camel - Scanned set of all original Sopwith Camel surviving drawings (same size as original drawings)

Just under 300 drawings.

Note: this may not be a complete set, but is all that survived

Sopwith Camel - Sets of A & P 121 (AP 121) trailing edge tubing for whole aircraft

Sopwith Camel - Sets of A & P 121 (AP 121) trailing edge tubing for whole aircraft


Price: £8,960.00 (Excluding VAT at 20%)

Quantity:

This set of trailing edge tubing for the whole aircraft includes sections for the wings, ailerons, rudder, elevator, centre section and fin.

A lot of tubing and a lot of work.

Sopwith Camel - Fuel tank pressure release valve, unmachined casting, plus springs and drawings

Sopwith Camel - Fuel tank pressure release valve, unmachined casting, plus springs and drawings


Price: £167.00 (Excluding VAT at 20%)

Quantity:

Sopwith Camel - Fuel tank pressure release valve, unmachined casting, plus springs and drawings

Does not include pressure gauge or other materials

PLEASE NOTE: Completed item shown with gauge for illustration purposes only and is not included in the sale

Sopwith Camel - Hand air pump made to drawing A.1686 (as fitted to many 1st WW British a/c)

Sopwith Camel - Hand air pump made to drawing A.1686 (as fitted to many 1st WW British a/c)


Price: £365.00 (Excluding VAT at 20%)

Quantity:

Sopwith Camel - Hand air pump made to drawing A.1686 (as fitted to many 1st WW British a/c)

Sopwith Camel - Instrument panel Part no. C.2061

Sopwith Camel - Instrument panel Part no. C.2061


Price: £479.00 (Excluding VAT at 20%)

Quantity:

Sopwith Camel - Instrument panel Part no. C.2061

made from original drawings and in the correct and very hard to find bass wood. Complete with holes for the major instruments.
More...

Sopwith Camel - Unmachined SL 167 Grip and Gun trigger casting set, 4 items

Sopwith Camel - Unmachined SL 167 Grip and Gun trigger casting set, 4 items


Price: £260.00 (Excluding VAT at 20%)

Quantity:

Sopwith Camel - Unmachined SL 167 Grip and Gun trigger casting set, 4 items

Sopwith Pup - Air Speed Indicator*

Sopwith Pup - Air Speed Indicator*


Price: £1,364.00 (Excluding VAT at 20%)

Quantity:

Sopwith Pup - Air Speed Indicator*

New made but identical looking from the outside to the original item. Modern internals

Sopwith Pup - Aldis sight.*

Sopwith Pup - Aldis sight.*


Price: £696.00 (Excluding VAT at 20%)

Quantity:


Aldis sight, excellent reproduction, made with internal cross hairs etc.

Please note:

1) Rubber eye-shield not included, however it is available seperately.
2) These items are made to order only. They take up to 4 weeks to manufacture and are made for us by a highly reputable company.


Sopwith Pup - Moulded rubber eye-shield for Aldis sight, with clip

Sopwith Pup - Moulded rubber eye-shield for Aldis sight, with clip


Price: £85.00 (Excluding VAT at 20%)

Quantity:

Moulded rubber eye-shield for Aldis sight, with clip.

Exact reproduction.

Original example shown for comparison (with no clip fitted).



Related products:

1. Sopwith Pup - Aldis sight.*

Sopwith Pup - Bank indicator (inclinometer).

Sopwith Pup - Bank indicator (inclinometer).


Price: £175.00 (Excluding VAT at 20%)

Quantity:

Sopwith Pup - Bank indicator (clinometer).

This is an alloy casting with a curved glass tube with air bubble incorporated in fine plaster casting as on the original and is fitted to most 1st WW British aircraft.

Engraved period detail for total authenticity.

PLEASE NOTE: The contemporary filling colour was either red or green and we cannot guarantee which of these colours we may supply.


****Now Back In Stock*****


Sopwith Pup - Compass card holder and deviation card.* Price per set (card plus frame)

Sopwith Pup - Compass card holder and deviation card.* Price per set (card plus frame)


Price: £27.50 (Excluding VAT at 20%)

Quantity:

Sopwith Pup - Compass card holder and deviation card.* Price per set (card plus frame)

Fitted to all British military aircraft from the 1st WW to the 2nd. The frame is painted black. The unused card is dated from the 30's, but is identical to that fitted to 1st WW a/c.

Price per set (card plus frame)



Related products:

1. 6A/387 - Compass Corrector/Deviation Card holder
2. RAF Form 316 - Compass Corrector/Deviation Card

6A/387 - Compass Corrector/Deviation Card holder

6A/387 - Compass Corrector/Deviation Card holder


Price: £25.00 (Excluding VAT at 20%)

Quantity:

6A/387 - Compass card corrector holder.

Available in black only.

Please advise as to which you require (RAF Form 316 not included but available to buy seperately).
More...

RAF Form 316 - Compass Corrector/Deviation Card

RAF Form 316 - Compass Corrector/Deviation Card


Price: £5.00 (Excluding VAT at 20%)

Quantity:

RAF Form 316

In an unused (1936 dated) compass corrector form.

Holder not included however is available to buy seperately.

Sopwith Pup - Control Column complete with SL 167 Grip

Sopwith Pup - Control Column complete with SL 167 Grip


Price: £1,896.00 (Excluding VAT at 20%)

Quantity:

Sopwith Pup - Control Column complete with SL 167 Grip

(Lower attachment holes are not drilled - these are drilled on assembly)

Sopwith Pup - Fuel filter (AGS 275). Complete ready to fit.*

Sopwith Pup - Fuel filter (AGS 275). Complete ready to fit.*


Price: £1,643.00 (Excluding VAT at 20%)

Quantity:

Sopwith Pup - Fuel filter (AGS 275). Complete ready to fit.*

AGS 275 Petrol Filter. This was used on most 1st WW British aircraft, and is for fuel systems that have 5/16" OD fuel pipes. This exact reproduction has been made for us to original drawings and specifications, has the main casting made of gunmetal which is soldered on the exterior, just as the original item. The filter is held in place with a phosphor bronze spring and the dome is removable for cleaning. As with all our reproductions, the quality is extremely high and no compromises were allowed in the specification and representation of this part.

Sopwith Pup - Fuel Filter Casting, filter mesh and spring (not made up) and drawing set.*

Sopwith Pup - Fuel Filter Casting, filter mesh and spring (not made up) and drawing set.*


Price: £89.00 (Excluding VAT at 20%)

Quantity:

Sopwith Pup - Fuel Filter Casting, filter mesh and spring (not made up) and drawing set.*

Sopwith Pup - Fine adjustment valve for 80 & 110 Le Rhone and Le Clerget engine.*

Sopwith Pup - Fine adjustment valve for 80 & 110 Le Rhone and Le Clerget engine.*


Price: £2,986.00 (Excluding VAT at 20%)

Quantity:



Fine adjustment valve as used on 80 & 110 Le Rhone and Le Clerget engine installations. Ready to use. State which engine and HP, but whilst we will try and match the correct needles, this cannot be garanteed due to lack of historic information and minor variations in build standards and specifications of these engines.

**Please state which engine and HP.**

Sopwith Pup - Set of castings and drawing for the Le Rhone fine adjustment valve.*

Sopwith Pup - Set of castings and drawing for the Le Rhone fine adjustment valve.*


Price: £126.00 (Excluding VAT at 20%)

Quantity:

Set of castings and drawings for the Le Rhone fine adjustment valve.

Warning! - There is a lot of work involved in making these!



Related products:

1. Sopwith Pup - Fine adjustment valve for 80 & 110 Le Rhone and Le Clerget engine.*

Sopwith Pup - Instrument Panel

Sopwith Pup - Instrument Panel


Price: £479.00 (Excluding VAT at 20%)

Quantity:

Sopwith Pup - Instrument Panel

Made from bass wood exactly as specified, complete with reinforcing battens and holes for main 1st WW instruments (these can be left out if required). Finished in Shellac.

Sopwith Pup - Magneto switch panel plate set (3 items)*

Sopwith Pup - Magneto switch panel plate set (3 items)*


Price: £175.00 (Excluding VAT at 20%)

Quantity:

Sopwith Pup - Magneto switch panel plate set (3 items)*

Fitted to most Sopwith types fitted with twin magnetos

Sopwith Pup - Magneto Switch*

Sopwith Pup - Magneto Switch*


Price: £200.00 (Excluding VAT at 20%)

Genuine Air Ministry marked twin porcelain/brass 'bell' switch.
FEW LEFT!

Single pole magneto switch, extremely rare very early marked type. Very few left now.

Sopwith Pup - Mk. IVA (or Mk. V) Pitot head (fitted to most 1st WW British a/c)*

Sopwith Pup - Mk. IVA (or Mk. V) Pitot head (fitted to most 1st WW British a/c)*


Price: £240.00 (Excluding VAT at 20%)

Sopwith Pup - Mk. IVA (or Mk. V) Pitot head (fitted to most 1st WW British a/c)*
OUT OF STOCK

Sopwith Pup - Pair of Brass manufacturer's plates* that go on panel.

Sopwith Pup - Pair of Brass manufacturer's plates* that go on panel.


Price: £240.00 (Excluding VAT at 20%)

Quantity:

Sopwith Pup - Pair of Brass manufacturer's plates* that go on panel.

Various Makers - Some Originals - Please Enquire for more info

Sopwith Pup - Rev Counter.*

Sopwith Pup - Rev Counter.*


Price: £896.00 (Excluding VAT at 20%)

Quantity:


Identical externally to original, but with a new movement.

Sopwith Pup - Twin Tampier throttle lever assembly for rotary engines.*

Sopwith Pup - Twin Tampier throttle lever assembly for rotary engines.*


Price: £1,400.00 (Excluding VAT at 20%)

Quantity:

Sopwith Pup - Twin Tampier throttle lever assembly for rotary engines.*



Fitted to all Sopwith types with rotary engines. Indistinguishable from originals. Nickel plated levers etc.

Sopwith Pup - Set of 3 unmachined castings of Twin Tampier throttle lever assembly for rotary engines, with drawings.*

Sopwith Pup - Set of 3 unmachined castings of Twin Tampier throttle lever assembly for rotary engines, with drawings.*


Price: £120.00 (Excluding VAT at 20%)

Quantity:

Sopwith Pup - Set of 3 unmachined castings of Twin Tampier throttle lever assembly for rotary engines, with drawings.*

Fitted to all Sopwith types with rotary engines.

Warning! There is a lot of work in making these!

Sopwith Pup - Sets of A & P 121 streamline tubing for wing, aileron, elevator etc. trailing edge

Sopwith Pup - Sets of A & P 121 streamline tubing for wing, aileron, elevator etc. trailing edge

Sopwith Pup - Sets of A & P 121 streamline tubing for wing, aileron, elevator etc. trailing edge


Please Contact us for Availability and Prices. £POA

Sopwith Pup - Scanned set of all known original Sopwith Pup drawings (aprox 79), plus some SL drawings

Sopwith Pup - Scanned set of all known original Sopwith Pup drawings (aprox 79), plus some SL drawings


Price: £474.00 (Excluding VAT at 20%)

Quantity:

Sopwith Pup - Scanned set of all known original Sopwith Pup drawings (aprox 79), plus some SL drawings.

Sopwith Pup - SL 179 - Fuel Sight Guage*

Sopwith Pup - SL 179 - Fuel Sight Guage*


Price: £1,950.00 (Excluding VAT at 20%)

Quantity:

Sopwith Pup - SL 179 - Fuel Sight Guage*

Complete with fuel cocks, glass sight tube etc.

Sopwith Pup - SL 445 - Gun Timing Plate*

Sopwith Pup - SL 445 - Gun Timing Plate*


Price: £96.00 (Excluding VAT at 20%)

Quantity:

Gun timing plate as fitted on the nose of the cowls on many Sopwith aircraft, part no. SL 445. These plates are deep etched brass, filled with black enamel and pressed into the double curvature shape of the cowling.

Sopwith Pup - Steel tubular cowling ring, that welds to the engine plate

Sopwith Pup - Steel tubular cowling ring, that welds to the engine plate


Price: £368.00 (Excluding VAT at 20%)

Quantity:

Sopwith Pup - Steel tubular cowling ring, that welds to the engine plate.

This is a special section with a dimple rolled into it that retains the cowling.

Sopwith Pup - Genuine 1st WW panel watches, overhauled/working

Sopwith Pup - Genuine 1st WW panel watches, overhauled/working


Price: £350.00 (Excluding VAT at 20%)

Sopwith Pup - Genuine 1st WW panel watches, overhauled/working

**Please enquire to check availability**

Sopwith Pup - Whitehead Aircraft strut transfers (varnish fix type)

Sopwith Pup - Whitehead Aircraft strut transfers (varnish fix type)


Price: £5.00 (Excluding VAT at 20%)

Quantity:

Sopwith Pup - Whitehead Aircraft strut transfers (varnish fix type)

Original And unused!

Rare find and limited in quantity. Difficult to use, but full instructions provided

Size: about 1.3/4" Ø
Price Each

Pulsator with dome glass and cut-off tap. Fitted to most a/c with rotary engine.*

Pulsator with dome glass and cut-off tap. Fitted to most a/c with rotary engine.*


Price: £200.00 (Excluding VAT at 20%)

Quantity:

Pulsator with dome glass and cut-off tap. Fitted to most a/c with rotary engine.*

Twin pulsator with dome glass and cut-off tap conjoined in one casting, for Gnome engined a/c

Twin pulsator with dome glass and cut-off tap conjoined in one casting, for Gnome engined a/c


Price: £400.00 (Excluding VAT at 20%)

Quantity:

Twin pulsator unit as fitted to some Gnome engines. Used on many 1st WW aircraft

Online Catalogue | Aircraft Spares |  Sopwith Pup and Camel