Online Catalogue
  •  
  • View Cart
  • Checkout
  • Items:, Value:
  •  

Product Sections


Main Pages


Best Sellers

AGS 895-1 - Crowbar or cable holding clips

AGS 895-1 - Crowbar or cable holding clips

£5.00

These are original AGS items and not modern incorrectly shaped billiard cue holders
find out more

NMP002 - R.A.F. cockpit engine plate

NMP002 - R.A.F. cockpit engine plate

R.A.F. cockpit engine plate.

This plate is fitted to most British 2nd World War and 1930's aeroplanes including the spitfire. It is an original item, made of brass, and is a Rolls Royce part; the size is 4" x 3".

NMP002A - 'A' Condition at £45 each excluding VAT and delivery.

****PLEASE NOTE**** Condition 'B' Items Now Out Of Stock
find out more

Ki-Gass priming pump - Small Type

Ki-Gass priming pump - Small Type

£399.00

These have been specially commisioned by us, due to the unavailability of these in even usable condition originals. They are quite perfect in every detail and are an extremely high quality item.

Please Note: If this pump is to be used on a pressurised fuel system, you will need to fit a non-return valve in the pipeline to the ki-gass pump from the tank.
find out more

5CW/545 - 5 Tumbler Switch Type B

5CW/545 - 5 Tumbler Switch Type B

£51.30

5CW/545 - 5 Tumbler Switch Type B.

These are now becoming quite hard to find; we can offer you some second-grade items for static instrument panel builds for example, see website for further details.
find out more

Bristol Propeller Transfer

Bristol Propeller Transfer

£11.00

Unused old stock, from the 1st WW they are of the varnish fix type. These are tricky to use and great care is needed. They are not made like this today, but the result is an almost completely flat transfer of the highest quality. Very limited number available, they are just under 3” in diameter. Full instructions are given on how to affix them.
find out more

New Products

MG08 15 'Spandau' Aircraft Machine Gun (deactivated) Serial No. 130

MG08 15 'Spandau' Aircraft Machine Gun (deactivated) Serial No. 130

£12,850.00

The exceedingly rare and famous gun is in undamaged condition, but has some missing parts (mainly internal, but the visible feed block for example is absent, though it is common to the ground version and one could surely be tracked down). Fitted to many German fighters in the 1st World War, very few exist today.
find out more

MG08 15 'Spandau' Aircraft Machine Gun (deactivated) Serial No. 4441

MG08 15 'Spandau' Aircraft Machine Gun (deactivated) Serial No. 4441

£9,450.00

This exceedingly rare and famous gun is from a shot-down aircraft, and has some war damage to it, but has also some missing parts (mainly internal, but the visible feed block and spring cover for example are absent) and there is minor corrosion. The gun was found in storage in a private English boarding school suggesting an ex-RFC/RAF pupil surviving the Great War donated it as a war souvenir. Fitted to many German fighters in the 1st World War, this gun intriguingly shows a number of remnants of splashed on scarlet paint of a contemporary nature. To avoid raising your hopes, the guns for the famous Fokker Dreidecker of Manfred von Richtoffen are (speculatively) stated by P.J. Carisella to be 695 & 1795, but we can find neither confirmation nor the source of this information; an unknown number of German Great War aircraft were painted scarlet, so further research may uncover more of this guns intriguing past. Deactivated to EU specifications, it can be sent anywhere in the EU. We cannot send this out of Europe - especially to the USA - unless the buyer arranges an import licence and only then will we apply for an export licence from the UK (the cost of this can be advised).
find out more

Instrument Pointers or Instrument Needles

Instrument Pointers or Instrument Needles

£7.89

These brass needles are made of .012" (0,29mm) thick brass and come in the sizes and shapes as in the drawing above. Please note that they do not come with the central hub or boss, and as this can vary from instrument to instrument we cannot stock the range.
find out more

5K/221 - Cleat, Aluminium No. 12

5K/221 - Cleat, Aluminium No. 12

£2.64

Clamps up to 1/8" rigid tube (capillary for example), though the AP 1086 Section 5K (electrical AGS) declares it is for "6mm Cable". This seems a bit of a squeeze unless it is rubber covered cable.
find out more

6A/70 - Flexible drive, Rev Counter Cable, 10ft

6A/70 - Flexible drive, Rev Counter Cable, 10ft

6A/70 - Flexible drive, Rev Counter Cable, 10ft

Standard Air Ministry rev counter cable.

Electro Plated £220.00
Brass £242.00

This item is made to order and is therefore non returnable.
find out more

6A/68 - Flexible drive, Rev Counter Cable, 9ft

6A/68 - Flexible drive, Rev Counter Cable, 9ft

6A/68 - Flexible drive, Rev Counter Cable, 9ft

Standard Air Ministry rev counter cable.

Electro Plated £220.00
Brass £242.00

This item is made to order and is therefore non returnable.
find out more

Streamline Tubing (Streamline Rolled Aircraft Section)

Online Catalogue | Aircraft Hardware | Aircraft Materials | Streamline Tubing & Rolled Aircraft Sections |  Streamline Tubing (Streamline Rolled Aircraft Section)

Square Rolled Aircraft Sections

Square Rolled Aircraft Sections

We have acquired all of the Accles & Pollock tooling to manufacture Oval and Streamline sections
We are now able to produce the majority of the circa 300 sections that they originally produced from tooling dating back to the first world war, however some of the tooling is in poor condition and will need replacing or reconditioning therefore if you require a specific section that you do not see listed please contact us.

Additionally re can manufacture square and rectangular tubing to most sizes originally produced by Reynolds.


Square Tube table

Square Tube table

Square Rolled Aircraft Section Info:

Above is an indication of some popular Square sections and their dimensions that we have previously produced.

We can make all special sections in random lengths (usually up to 10ft) in aluminium, steel or stainless steel. We can typically make any section from tube of between 22-17SWG

Please also note that these items are made to order and not held in stock, as such expect delays of two week or more for unusual sizes.


To make an enquiry regarding availability or any special requirements that you may have please contact us >>



Streamline Tubing & Rolled Aircraft Sections Infomation

Streamline Tubing & Rolled Aircraft Sections Infomation PDF Download >>


Sets of Streamline tubing for Sopwith Pup and Camel Aircraft

Sets of Streamline tubing for Sopwith Pup and Camel Aircraft

Online Catalogue | Aircraft Hardware | Aircraft Materials | Streamline Tubing & Rolled Aircraft Sections |  Streamline Tubing (Streamline Rolled Aircraft Section)